Gold Cube Concentrator Review 2 of 3: How The Gold Cube Concentrator G-Force Separator Works

Gold Cube Concentrator Review 2 of 3: How The Gold Cube Concentrator G-Force Separator Works

By Marc Prinz

 Let’s take a closer look at how the Gold Cube Concentrator G-Force Separator and how it works!  The Gold Cube G-Force Separator is the second step in the Gold Cube process.

The Gold Cube Concentrator has a brilliant design and an impressive 98% gold recovery.  I think the Gold Cube Concentrators G-Force separator is genius because is takes the surface tension off the water and forces the gold to collect at the top of the vortex matting.  This is a critical step and one that I love because I work in gold bearing areas that are famous for having ultra fine gold.  Plus I get the best fine gold recovery I think you can get with the Gold Cube Concentrator. You do not have to use Jet Dry or any other detentioner.  Learn more about the two guys that invented the Gold Cube here www.goldcube.net and they sell this Gold Cube direct to the public.

The Gold Cube G-Fore Separator Process:

(1) 8 mesh or smaller gold bearing material is added to the water flow (2) on the Gold Cube slick plate (3). The slurry (4) drops into the Gold Cube G-Force Separator (5). The slurry accelerates around the bottom of the trough and the centrifugal force helps move gold outward (6). As all the material leaves the Gold Cube G-Force Separator, high volume water carries the lighter material up and away (7). The gold is then dropped into the beginning of the Gold Cube vortex mat (8). This process is repeated in each of the Gold Cube’s separation trays.

If you want to get one or learn more go HERE www.goldcube.net